When Matt and I went to re-frame the rear wall of the COMET, we knew we had to do some re-design as well. First of all, at some point there is going to be a "bumper garden" (hehe, get it? on top of the bumper...) mounted onto the back of the trailer under the window. Ok, so it's like a way-glorified window box, but on a moving trailer, and made with polycarbonate so it's also like a tiny greenhouse too. Since there will at some point soon be soil and metal and plants hanging off of the back wall, we knew we had to beef up the framing. I wanted enough studs that we could lag into to support the bumper garden. The second part of the design had to address the really weird original framing, which had the rear bench (couch and also my bed) come down halfway in front of the rear hatch, which is the only place to really store anything large. Basically, the rear bench bisected the hatch, and I thought that was dumb, because I want full hatch access! So we raised the bench up 6 inches, so it now clears the rear hatch door and give us a little more storage. Here's how we did it! A little reference, so you can see how the original framing interfered with the rear access door.